- Closing technique designed and Trimmed uniquely by AICC in order to prevent back flow of the liquid and its harmful and damaging impact
- Suitable for installing in different positions (Vertically or horizontally)
- Drilling and dimension of flanges according to EN 1092-2 and other standards upon request
- Body made of ductile iron EN1563(GJS400) for PN10/16 and EN1563(GJS500) for PN25
- Blocking Disk made of ductile iron volcanized with EPDM according to DIN53538-5 perfectly resistant against hammer effects
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Spindle made of stainless steel 1.4021 according to DIN17440
- Spring made of stainless steel according to DIN17440
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
-
Used in industrial and constructional fields and pumping stations for one-way flow of potable water and non-corrosive liquids with maximum temperature of 80oC; prevents back flow of liquids and hammer effects -
Used in industrial and constructional fields and pumping stations for one-way flow of potable water and non-corrosive liquids with maximum temperature of 80oC; prevents back flow of liquids and hammer effects- Closing technique designed and Trimmed uniquely by AICC in order to prevent back flow of the liquid and its harmful and damaging impact
- Suitable for installing in different positions (Vertically or horizontally)
- Drilling and dimension of flanges according to EN 1092-2 and other standards upon request
- Body made of ductile iron EN1563(GJS400) for PN10/16 and EN1563(GJS500) for PN25
- Blocking Disk made of ductile iron volcanized with EPDM according to DIN53538-5 perfectly resistant against hammer effects
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Spindle made of stainless steel 1.4021 according to DIN17440
- Spring made of stainless steel according to DIN17440
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
-
Used in industrial and constructional fields and pumping stations for one-way flow of potable water and non-corrosive liquids with maximum temperature of 80oC; prevents back flow of liquids and hammer effects- Closing technique designed and Trimmed uniquely by AICC in order to prevent back flow of the liquid and its harmful and damaging impact
- Suitable for installing in different positions (Vertically or horizontally)
- Drilling and dimension of flanges according to EN 1092-2 and other standards upon request
- Body made of ductile iron EN1563(GJS400) for PN10/16 and EN1563(GJS500) for PN25
- Blocking Disk made of ductile iron volcanized with EPDM according to DIN53538-5 perfectly resistant against hammer effects
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Spindle made of stainless steel 1.4021 according to DIN17440
- Spring made of stainless steel according to DIN17440
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
-
Used in industrial and constructional fields and pumping stations for one-way flow of potable water and non-corrosive liquids with maximum temperature of 80oC; prevents back flow of liquids and hammer effects- Closing technique designed and Trimmed uniquely by AICC in order to prevent back flow of the liquid and its harmful and damaging impact
- Suitable for installing in different positions (Vertically or horizontally)
- Drilling and dimension of flanges according to EN 1092-2 and other standards upon request
- Body made of ductile iron EN1563(GJS400) for PN10/16 and EN1563(GJS500) for PN25
- Blocking Disk made of ductile iron volcanized with EPDM according to DIN53538-5 perfectly resistant against hammer effects
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Spindle made of stainless steel 1.4021 according to DIN17440
- Spring made of stainless steel according to DIN17440
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
-
Used in industrial and constructional fields and pumping stations for one-way flow of potable water and non-corrosive liquids with maximum temperature of 80oC; prevents back flow of liquids and hammer effects- Closing technique designed and Trimmed uniquely by AICC in order to prevent back flow of the liquid and its harmful and damaging impact
- Suitable for installing in different positions (Vertically or horizontally)
- Drilling and dimension of flanges according to EN 1092-2 and other standards upon request
- Body made of ductile iron EN1563(GJS400) for PN10/16 and EN1563(GJS500) for PN25
- Blocking Disk made of ductile iron volcanized with EPDM according to DIN53538-5 perfectly resistant against hammer effects
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Spindle made of stainless steel 1.4021 according to DIN17440
- Spring made of stainless steel according to DIN17440
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
-
Used in industrial and constructional fields and pumping stations for one-way flow of potable water and non-corrosive liquids with maximum temperature of 80oC; prevents back flow of liquids and hammer effects- Closing technique designed and Trimmed uniquely by AICC in order to prevent back flow of the liquid and its harmful and damaging impact
- Suitable for installing in different positions (Vertically or horizontally)
- Drilling and dimension of flanges according to EN 1092-2 and other standards upon request
- Body made of ductile iron EN1563(GJS400) for PN10/16 and EN1563(GJS500) for PN25
- Blocking Disk made of ductile iron volcanized with EPDM according to DIN53538-5 perfectly resistant against hammer effects
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Spindle made of stainless steel 1.4021 according to DIN17440
- Spring made of stainless steel according to DIN17440
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
-
Used in industrial and constructional fields and pumping stations for one-way flow of potable water and non-corrosive liquids with maximum temperature of 80oC; prevents back flow of liquids and hammer effects- Closing technique designed and Trimmed uniquely by AICC in order to prevent back flow of the liquid and its harmful and damaging impact
- Suitable for installing in different positions (Vertically or horizontally)
- Drilling and dimension of flanges according to EN 1092-2 and other standards upon request
- Body made of ductile iron EN1563(GJS400) for PN10/16 and EN1563(GJS500) for PN25
- Blocking Disk made of ductile iron volcanized with EPDM according to DIN53538-5 perfectly resistant against hammer effects
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Spindle made of stainless steel 1.4021 according to DIN17440
- Spring made of stainless steel according to DIN17440
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
-
Used in industrial and constructional fields and pumping stations for one-way flow of potable water and non-corrosive liquids with maximum temperature of 80oC; prevents back flow of liquids and hammer effects- Closing technique designed and Trimmed uniquely by AICC in order to prevent back flow of the liquid and its harmful and damaging impact
- Suitable for installing in different positions (Vertically or horizontally)
- Drilling and dimension of flanges according to EN 1092-2 and other standards upon request
- Body made of ductile iron EN1563(GJS400) for PN10/16 and EN1563(GJS500) for PN25
- Blocking Disk made of ductile iron volcanized with EPDM according to DIN53538-5 perfectly resistant against hammer effects
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Spindle made of stainless steel 1.4021 according to DIN17440
- Spring made of stainless steel according to DIN17440
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
-
Used in industrial and constructional fields and pumping stations for one-way flow of potable water and non-corrosive liquids with maximum temperature of 80oC; prevents back flow of liquids and hammer effects- Closing technique designed and Trimmed uniquely by AICC in order to prevent back flow of the liquid and its harmful and damaging impact
- Suitable for installing in different positions (Vertically or horizontally)
- Drilling and dimension of flanges according to EN 1092-2 and other standards upon request
- Body made of ductile iron EN1563(GJS400) for PN10/16 and EN1563(GJS500) for PN25
- Blocking Disk made of ductile iron volcanized with EPDM according to DIN53538-5 perfectly resistant against hammer effects
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Spindle made of stainless steel 1.4021 according to DIN17440
- Spring made of stainless steel according to DIN17440
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
-
The valve is used in industrial, agricultural and water line systems, potable water, pump stations, municipal and industrial sewage for non-corrosive liquids with maximum temperature of 80oC- This valve is exclusively designed by AICC to provide optimum service and operation
- Usable vertically or horizontally (Minimum pressure neede for sealing in horizontal status 1.5 Bar)
- Self-cleaning property due to continuous movement of the ball
- Drilling and dimension of flanges according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Body made of ductile iron EN1563(GJS400)
- Disk made of ductile iron volcanized with EPDM rubber according to DIN53538-5
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
- When installing valve, attention should be paid to the direction of arrow on the body.
-
The valve is used in industrial, agricultural and water line systems, potable water, pump stations, municipal and industrial sewage for non-corrosive liquids with maximum temperature of 80oC- This valve is exclusively designed by AICC to provide optimum service and operation
- Usable vertically or horizontally (Minimum pressure neede for sealing in horizontal status 1.5 Bar)
- Self-cleaning property due to continuous movement of the ball
- Drilling and dimension of flanges according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Body made of ductile iron EN1563(GJS400)
- Disk made of ductile iron volcanized with EPDM rubber according to DIN53538-5
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
- When installing valve, attention should be paid to the direction of arrow on the body.
-
The valve is used in industrial, agricultural and water line systems, potable water, pump stations, municipal and industrial sewage for non-corrosive liquids with maximum temperature of 80oC- This valve is exclusively designed by AICC to provide optimum service and operation
- Usable vertically or horizontally (Minimum pressure neede for sealing in horizontal status 1.5 Bar)
- Self-cleaning property due to continuous movement of the ball
- Drilling and dimension of flanges according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Body made of ductile iron EN1563(GJS400)
- Disk made of ductile iron volcanized with EPDM rubber according to DIN53538-5
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
- When installing valve, attention should be paid to the direction of arrow on the body.
-
The valve is used in industrial, agricultural and water line systems, potable water, pump stations, municipal and industrial sewage for non-corrosive liquids with maximum temperature of 80oC- This valve is exclusively designed by AICC to provide optimum service and operation
- Usable vertically or horizontally (Minimum pressure neede for sealing in horizontal status 1.5 Bar)
- Self-cleaning property due to continuous movement of the ball
- Drilling and dimension of flanges according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Body made of ductile iron EN1563(GJS400)
- Disk made of ductile iron volcanized with EPDM rubber according to DIN53538-5
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
- When installing valve, attention should be paid to the direction of arrow on the body.
-
The valve is used in industrial, agricultural and water line systems, potable water, pump stations, municipal and industrial sewage for non-corrosive liquids with maximum temperature of 80oC- This valve is exclusively designed by AICC to provide optimum service and operation
- Usable vertically or horizontally (Minimum pressure neede for sealing in horizontal status 1.5 Bar)
- Self-cleaning property due to continuous movement of the ball
- Drilling and dimension of flanges according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Body made of ductile iron EN1563(GJS400)
- Disk made of ductile iron volcanized with EPDM rubber according to DIN53538-5
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
- When installing valve, attention should be paid to the direction of arrow on the body.
-
The valve is used in industrial, agricultural and water line systems, potable water, pump stations, municipal and industrial sewage for non-corrosive liquids with maximum temperature of 80oC- This valve is exclusively designed by AICC to provide optimum service and operation
- Usable vertically or horizontally (Minimum pressure neede for sealing in horizontal status 1.5 Bar)
- Self-cleaning property due to continuous movement of the ball
- Drilling and dimension of flanges according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Body made of ductile iron EN1563(GJS400)
- Disk made of ductile iron volcanized with EPDM rubber according to DIN53538-5
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
- When installing valve, attention should be paid to the direction of arrow on the body.
-
The valve is used in industrial, agricultural and water line systems, potable water, pump stations, municipal and industrial sewage for non-corrosive liquids with maximum temperature of 80oC- This valve is exclusively designed by AICC to provide optimum service and operation
- Usable vertically or horizontally (Minimum pressure neede for sealing in horizontal status 1.5 Bar)
- Self-cleaning property due to continuous movement of the ball
- Drilling and dimension of flanges according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Body made of ductile iron EN1563(GJS400)
- Disk made of ductile iron volcanized with EPDM rubber according to DIN53538-5
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
- When installing valve, attention should be paid to the direction of arrow on the body.
-
The valve is used in industrial, agricultural and water line systems, potable water, pump stations, municipal and industrial sewage for non-corrosive liquids with maximum temperature of 80oC- This valve is exclusively designed by AICC to provide optimum service and operation
- Usable vertically or horizontally (Minimum pressure neede for sealing in horizontal status 1.5 Bar)
- Self-cleaning property due to continuous movement of the ball
- Drilling and dimension of flanges according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Body made of ductile iron EN1563(GJS400)
- Disk made of ductile iron volcanized with EPDM rubber according to DIN53538-5
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
- When installing valve, attention should be paid to the direction of arrow on the body.
-
The valve is used in industrial, agricultural and water line systems, potable water, pump stations for non-corrosive liquids with maximum temperature of 80oC- Drilling and dimension of flanges according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to EN 558-1
- Body made of ductile iron EN1563(GJS400)
- The Blocking ball made of Aluminum volcanized with EPDM according to DIN53538-5
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
-
The valve is used in industrial, agricultural and water line systems, potable water, pump stations for non-corrosive liquids with maximum temperature of 80oC- Drilling and dimension of flanges according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to EN 558-1
- Body made of ductile iron EN1563(GJS400)
- The Blocking ball made of Aluminum volcanized with EPDM according to DIN53538-5
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
-
The valve is used in industrial, agricultural and water line systems, potable water, pump stations for non-corrosive liquids with maximum temperature of 80oC- Drilling and dimension of flanges according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to EN 558-1
- Body made of ductile iron EN1563(GJS400)
- The Blocking ball made of Aluminum volcanized with EPDM according to DIN53538-5
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677