- Full bore valve (Seatless)
- Low price, light weight, reliable structure, easy service and handling.
- Body made of ductile iron EN1563(GJS400)
- Disk made of ductile iron volcanized with EPDM rubber according to DIN 53538-5
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
-
Usable for water flow on/off purposes in agriculture and pools as on irrigation hydrant valve. -
Usable for water flow on/off purposes in agriculture and pools as on irrigation hydrant valve.- Full bore valve (Seatless)
- Low price, light weight, reliable structure, easy service and handling.
- Body made of ductile iron EN1563(GJS400)
- Disk made of ductile iron volcanized with EPDM rubber according to DIN 53538-5
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
-
Usable for water flow on/off purposes in agriculture and pools as on irrigation hydrant valve.- Full bore valve (Seatless)
- Low price, light weight, reliable structure, easy service and handling.
- Body made of ductile iron EN1563(GJS400)
- Disk made of ductile iron volcanized with EPDM rubber according to DIN 53538-5
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
-
Usable for water flow on/off purposes in agriculture and pools as on irrigation hydrant valve.- Full bore valve (Seatless)
- Low price, light weight, reliable structure, easy service and handling.
- Body made of ductile iron EN1563(GJS400)
- Disk made of ductile iron volcanized with EPDM rubber according to DIN 53538-5
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
-
Usable for water flow on/off purposes in agriculture and pools as on irrigation hydrant valve.- Full bore valve (Seatless)
- Low price, light weight, reliable structure, easy service and handling.
- Body made of ductile iron EN1563(GJS400)
- Disk made of ductile iron volcanized with EPDM rubber according to DIN 53538-5
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
-
Usable for water flow on/off purposes in agriculture and pools as on irrigation hydrant valve.- Full bore valve (Seatless)
- Low price, light weight, reliable structure, easy service and handling.
- Body made of ductile iron EN1563(GJS400)
- Disk made of ductile iron volcanized with EPDM rubber according to DIN 53538-5
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
-
Usable for water flow on/off purposes in agriculture and pools as on irrigation hydrant valve.- Full bore valve (Seatless)
- Low price, light weight, reliable structure, easy service and handling.
- Body made of ductile iron EN1563(GJS400)
- Disk made of ductile iron volcanized with EPDM rubber according to DIN 53538-5
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
-
This hydrant is used for fire extinguishing operations and municipal water lines- Easy and fast service and handling with no need to detach the valve from the pipeline (Designed by AICC)
- Drilling and dimension of flanges according to EN 1092-2 and other standards upon request
- Body made of ductile iron EN1563(GJS400) for PN10/16
- The obturator made of ductile iron volcanized with EPDM according to DIN53538-5
- Spindle made of stainless steel 1.4021 according to DIN17440 with rolled thread and ultra-burnished sealing surface
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
-
This hydrant is used for fire extinguishing operations and municipal water lines
- Easy and fast service and handling with no need to detach the valve from the pipeline (Designed by AICC)
- Drilling and dimension of flanges according to EN 1092-2 and other standards upon request
- Body made of ductile iron EN1563(GJS400) for PN10/16
- The obturator made of ductile iron volcanized with EPDM according to DIN53538-5
- Spindle made of stainless steel 1.4021 according to DIN17440 with rolled thread and ultra-burnished sealing surface
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
-
It is used in industrial, agricultural and water line systems, potable water and pump stations for non-corrosive liquids with maximum temperature of 80oC in order to prevent suspended particles enter the water network- Flanges Drilled according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Body made of ductile iron EN1563(GJS400)
- Stainless steel filter AISI304 according to DIN17440
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
-
It is used in industrial, agricultural and water line systems, potable water and pump stations for non-corrosive liquids with maximum temperature of 80oC in order to prevent suspended particles enter the water network- Flanges Drilled according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Body made of ductile iron EN1563(GJS400)
- Stainless steel filter AISI304 according to DIN17440
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
-
It is used in industrial, agricultural and water line systems, potable water and pump stations for non-corrosive liquids with maximum temperature of 80oC in order to prevent suspended particles enter the water network- Flanges Drilled according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Body made of ductile iron EN1563(GJS400)
- Stainless steel filter AISI304 according to DIN17440
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
-
It is used in industrial, agricultural and water line systems, potable water and pump stations for non-corrosive liquids with maximum temperature of 80oC in order to prevent suspended particles enter the water network- Flanges Drilled according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Body made of ductile iron EN1563(GJS400)
- Stainless steel filter AISI304 according to DIN17440
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
-
It is used in industrial, agricultural and water line systems, potable water and pump stations for non-corrosive liquids with maximum temperature of 80oC in order to prevent suspended particles enter the water network- Flanges Drilled according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Body made of ductile iron EN1563(GJS400)
- Stainless steel filter AISI304 according to DIN17440
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
-
It is used in industrial, agricultural and water line systems, potable water and pump stations for non-corrosive liquids with maximum temperature of 80oC in order to prevent suspended particles enter the water network- Flanges Drilled according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Body made of ductile iron EN1563(GJS400)
- Stainless steel filter AISI304 according to DIN17440
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
-
It is used in industrial, agricultural and water line systems, potable water and pump stations for non-corrosive liquids with maximum temperature of 80oC in order to prevent suspended particles enter the water network- Flanges Drilled according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Body made of ductile iron EN1563(GJS400)
- Stainless steel filter AISI304 according to DIN17440
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
-
It is used in industrial, agricultural and water line systems, potable water and pump stations for non-corrosive liquids with maximum temperature of 80oC in order to prevent suspended particles enter the water network- Flanges Drilled according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Body made of ductile iron EN1563(GJS400)
- Stainless steel filter AISI304 according to DIN17440
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
-
It is used in industrial, agricultural and water line systems, potable water and pump stations for non-corrosive liquids with maximum temperature of 80oC in order to prevent suspended particles enter the water network- Flanges Drilled according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Body made of ductile iron EN1563(GJS400)
- Stainless steel filter AISI304 according to DIN17440
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
-
- The valve is used in industrial, agricultural and water line system, potable water, pump station with maximum temperature of 80oC.
- Easy installation and maintenance, low pressure drop.
- Full bore valve
- Self cleaning property due to continuous movement of the ball.
- Excellent resistant to erosion and corrosion.
- Drilling and dimension of flanges according to (EN558-1) DIN3202-1
- Body mad of ductile iron EN1563 (GJS400)
- Ball made of Aluminum volcanized with EPDM according to DIN53538-5 resistant against friction and hammer effect.
- Stainless steel filter AISI304 according to DIN17440 with 5mm diameter of hole.
- Inside and outside surfaced of body with a minimum of 250 micron epoxy electrostatic method coating according DIN30677
-
- The valve is used in industrial, agricultural and water line system, potable water, pump station with maximum temperature of 80oC.
- Easy installation and maintenance, low pressure drop.
- Full bore valve
- Self cleaning property due to continuous movement of the ball.
- Excellent resistant to erosion and corrosion.
- Drilling and dimension of flanges according to (EN558-1) DIN3202-1
- Body mad of ductile iron EN1563 (GJS400)
- Ball made of Aluminum volcanized with EPDM according to DIN53538-5 resistant against friction and hammer effect.
- Stainless steel filter AISI304 according to DIN17440 with 5mm diameter of hole.
- Inside and outside surfaced of body with a minimum of 250 micron epoxy electrostatic method coating according DIN30677