- The valve parts, spindle disposition mechanism and sealing uniquely designed by AICC.
- Easy service with no need to detach the valve from the water line system
- Suitable for underground systems as heavy duty valve
- Designed and manufactured according to DIN3352-4 and ISIRI3363
- Flanges drilled according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Body, wedge and bonnet made of ductile iron EN1563(GJS400) for PN10/16 and EN1563(GJS500) for PN25
- Wedge rubberized all over with EPEM according to DIN53538-5
- Spindle made of stainless steel 1.4021 according to DIN17440 with rolled thread and ultra-burnished sealing surface
- Inside and outside surfaces covered with a minimum of 250 micron epoxy electrostatic paint coating according to DIN30677
- Sizes DN50 to DN300 from series F5 are available
-
The valve is used in industrial and constructional fields for on/off purposes of drinking water and non-corrosive liquids with maximum temperature of 80oC.
-
The valve is used in industrial and constructional fields for on/off purposes of drinking water and non-corrosive liquids with maximum temperature of 80oC.
- The valve parts, spindle disposition mechanism and sealing uniquely designed by AICC.
- Easy service with no need to detach the valve from the water line system
- Suitable for underground systems as heavy duty valve
- Designed and manufactured according to DIN3352-4 and ISIRI3363
- Flanges drilled according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Body, wedge and bonnet made of ductile iron EN1563(GJS400) for PN10/16 and EN1563(GJS500) for PN25
- Wedge rubberized all over with EPEM according to DIN53538-5
- Spindle made of stainless steel 1.4021 according to DIN17440 with rolled thread and ultra-burnished sealing surface
- Inside and outside surfaces covered with a minimum of 250 micron epoxy electrostatic paint coating according to DIN30677
- Sizes DN50 to DN600 from series F4 are available
-
The valve is used in industrial and constructional fields for on/off purposes of drinking water and non-corrosive liquids with maximum temperature of 80oC.
- The valve parts, spindle disposition mechanism and sealing uniquely designed by AICC.
- Easy service with no need to detach the valve from the water line system
- Suitable for underground systems as heavy duty valve
- Designed and manufactured according to DIN3352-4 and ISIRI3363
- Flanges drilled according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Body, wedge and bonnet made of ductile iron EN1563(GJS400) for PN10/16 and EN1563(GJS500) for PN25
- Wedge rubberized all over with EPEM according to DIN53538-5
- Spindle made of stainless steel 1.4021 according to DIN17440 with rolled thread and ultra-burnished sealing surface
- Inside and outside surfaces covered with a minimum of 250 micron epoxy electrostatic paint coating according to DIN30677
- Sizes DN50 to DN600 from series F4 are available
-
The valve is used in industrial and constructional fields for on/off purposes of drinking water and non-corrosive liquids with maximum temperature of 80oC.
- The valve parts, spindle disposition mechanism and sealing uniquely designed by AICC.
- Easy service with no need to detach the valve from the water line system
- Suitable for underground systems as heavy duty valve
- Designed and manufactured according to DIN3352-4 and ISIRI3363
- Flanges drilled according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Body, wedge and bonnet made of ductile iron EN1563(GJS400) for PN10/16 and EN1563(GJS500) for PN25
- Wedge rubberized all over with EPEM according to DIN53538-5
- Spindle made of stainless steel 1.4021 according to DIN17440 with rolled thread and ultra-burnished sealing surface
- Inside and outside surfaces covered with a minimum of 250 micron epoxy electrostatic paint coating according to DIN30677
- Sizes DN50 to DN600 from series F4 are available
-
The valve is used in industrial and constructional fields for on/off purposes of drinking water and non-corrosive liquids with maximum temperature of 80oC.
- The valve parts, spindle disposition mechanism and sealing uniquely designed by AICC.
- Easy service with no need to detach the valve from the water line system
- Suitable for underground systems as heavy duty valve
- Designed and manufactured according to DIN3352-4 and ISIRI3363
- Flanges drilled according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Body, wedge and bonnet made of ductile iron EN1563(GJS400) for PN10/16 and EN1563(GJS500) for PN25
- Wedge rubberized all over with EPEM according to DIN53538-5
- Spindle made of stainless steel 1.4021 according to DIN17440 with rolled thread and ultra-burnished sealing surface
- Inside and outside surfaces covered with a minimum of 250 micron epoxy electrostatic paint coating according to DIN30677
- Sizes DN50 to DN600 from series F4 are available
-
The valve is used in industrial and constructional fields for on/off purposes of drinking water and non-corrosive liquids with maximum temperature of 80oC.
- The valve parts, spindle disposition mechanism and sealing uniquely designed by AICC.
- Easy service with no need to detach the valve from the water line system
- Suitable for underground systems as heavy duty valve
- Designed and manufactured according to DIN3352-4 and ISIRI3363
- Flanges drilled according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Body, wedge and bonnet made of ductile iron EN1563(GJS400) for PN10/16 and EN1563(GJS500) for PN25
- Wedge rubberized all over with EPEM according to DIN53538-5
- Spindle made of stainless steel 1.4021 according to DIN17440 with rolled thread and ultra-burnished sealing surface
- Inside and outside surfaces covered with a minimum of 250 micron epoxy electrostatic paint coating according to DIN30677
- Sizes DN50 to DN600 from series F4 are available
-
The valve is used in industrial and constructional fields for on/off purposes of drinking water and non-corrosive liquids with maximum temperature of 80oC.
- The valve parts, spindle disposition mechanism and sealing uniquely designed by AICC.
- Easy service with no need to detach the valve from the water line system
- Suitable for underground systems as heavy duty valve
- Designed and manufactured according to DIN3352-4 and ISIRI3363
- Flanges drilled according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Body, wedge and bonnet made of ductile iron EN1563(GJS400) for PN10/16 and EN1563(GJS500) for PN25
- Wedge rubberized all over with EPEM according to DIN53538-5
- Spindle made of stainless steel 1.4021 according to DIN17440 with rolled thread and ultra-burnished sealing surface
- Inside and outside surfaces covered with a minimum of 250 micron epoxy electrostatic paint coating according to DIN30677
- Sizes DN50 to DN600 from series F4 are available
-
The valve is used in industrial and constructional fields for on/off purposes of drinking water and non-corrosive liquids with maximum temperature of 80oC.
- The valve parts, spindle disposition mechanism and sealing uniquely designed by AICC.
- Easy service with no need to detach the valve from the water line system
- Suitable for underground systems as heavy duty valve
- Designed and manufactured according to DIN3352-4 and ISIRI3363
- Flanges drilled according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Body, wedge and bonnet made of ductile iron EN1563(GJS400) for PN10/16 and EN1563(GJS500) for PN25
- Wedge rubberized all over with EPEM according to DIN53538-5
- Spindle made of stainless steel 1.4021 according to DIN17440 with rolled thread and ultra-burnished sealing surface
- Inside and outside surfaces covered with a minimum of 250 micron epoxy electrostatic paint coating according to DIN30677
- Sizes DN50 to DN600 from series F4 are available
-
The valve is used in industrial and constructional fields for on/off purposes of drinking water and non-corrosive liquids with maximum temperature of 80oC.
- The valve parts, spindle disposition mechanism and sealing uniquely designed by AICC.
- Easy service with no need to detach the valve from the water line system
- Suitable for underground systems as heavy duty valve
- Designed and manufactured according to DIN3352-4 and ISIRI3363
- Flanges drilled according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Body, wedge and bonnet made of ductile iron EN1563(GJS400) for PN10/16 and EN1563(GJS500) for PN25
- Wedge rubberized all over with EPEM according to DIN53538-5
- Spindle made of stainless steel 1.4021 according to DIN17440 with rolled thread and ultra-burnished sealing surface
- Inside and outside surfaces covered with a minimum of 250 micron epoxy electrostatic paint coating according to DIN30677
- Sizes DN50 to DN600 from series F4 are available
-
The valve is used in industrial and constructional fields for on/off purposes of drinking water and non-corrosive liquids with maximum temperature of 80oC.
- The valve parts, spindle disposition mechanism and sealing uniquely designed by AICC.
- Easy service with no need to detach the valve from the water line system
- Suitable for underground systems as heavy duty valve
- Designed and manufactured according to DIN3352-4 and ISIRI3363
- Flanges drilled according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Body, wedge and bonnet made of ductile iron EN1563(GJS400) for PN10/16 and EN1563(GJS500) for PN25
- Wedge rubberized all over with EPEM according to DIN53538-5
- Spindle made of stainless steel 1.4021 according to DIN17440 with rolled thread and ultra-burnished sealing surface
- Inside and outside surfaces covered with a minimum of 250 micron epoxy electrostatic paint coating according to DIN30677
- Sizes DN50 to DN600 from series F4 are available
-
The valve is used in industrial and constructional fields for on/off purposes of drinking water and non-corrosive liquids with maximum temperature of 80oC.
- The valve parts, spindle disposition mechanism and sealing uniquely designed by AICC.
- Easy service with no need to detach the valve from the water line system
- Suitable for underground systems as heavy duty valve
- Designed and manufactured according to DIN3352-4 and ISIRI3363
- Flanges drilled according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Body, wedge and bonnet made of ductile iron EN1563(GJS400) for PN10/16 and EN1563(GJS500) for PN25
- Wedge rubberized all over with EPEM according to DIN53538-5
- Spindle made of stainless steel 1.4021 according to DIN17440 with rolled thread and ultra-burnished sealing surface
- Inside and outside surfaces covered with a minimum of 250 micron epoxy electrostatic paint coating according to DIN30677
- Sizes DN50 to DN600 from series F4 are available
-
The valve is used in industrial and constructional fields for on/off purposes of drinking water and non-corrosive liquids with maximum temperature of 80oC.
- The valve parts, spindle disposition mechanism and sealing uniquely designed by AICC.
- Easy service with no need to detach the valve from the water line system
- Suitable for underground systems as heavy duty valve
- Designed and manufactured according to DIN3352-4 and ISIRI3363
- Flanges drilled according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Body, wedge and bonnet made of ductile iron EN1563(GJS400) for PN10/16 and EN1563(GJS500) for PN25
- Wedge rubberized all over with EPEM according to DIN53538-5
- Spindle made of stainless steel 1.4021 according to DIN17440 with rolled thread and ultra-burnished sealing surface
- Inside and outside surfaces covered with a minimum of 250 micron epoxy electrostatic paint coating according to DIN30677
- Sizes DN50 to DN600 from series F4 are available
-
The valve is used in industrial and constructional fields for on/off purposes of drinking water and non-corrosive liquids with maximum temperature of 80oC.
- The valve parts, spindle disposition mechanism and sealing uniquely designed by AICC.
- Easy service with no need to detach the valve from the water line system
- Suitable for underground systems as heavy duty valve
- Designed and manufactured according to DIN3352-4 and ISIRI3363
- Flanges drilled according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Body, wedge and bonnet made of ductile iron EN1563(GJS400) for PN10/16 and EN1563(GJS500) for PN25
- Wedge rubberized all over with EPEM according to DIN53538-5
- Spindle made of stainless steel 1.4021 according to DIN17440 with rolled thread and ultra-burnished sealing surface
- Inside and outside surfaces covered with a minimum of 250 micron epoxy electrostatic paint coating according to DIN30677
- Sizes DN50 to DN600 from series F4 are available
-
The valve is used in industrial and constructional fields for on/off purposes of drinking water and non-corrosive liquids with maximum temperature of 80oC.
- The valve parts, spindle disposition mechanism and sealing uniquely designed by AICC.
- Easy service with no need to detach the valve from the water line system
- Suitable for underground systems as heavy duty valve
- Designed and manufactured according to DIN3352-4 and ISIRI3363
- Flanges drilled according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Body, wedge and bonnet made of ductile iron EN1563(GJS400) for PN10/16 and EN1563(GJS500) for PN25
- Wedge rubberized all over with EPEM according to DIN53538-5
- Spindle made of stainless steel 1.4021 according to DIN17440 with rolled thread and ultra-burnished sealing surface
- Inside and outside surfaces covered with a minimum of 250 micron epoxy electrostatic paint coating according to DIN30677
- Sizes DN50 to DN600 from series F4 are available
-
The valve is used in industrial and constructional fields for on/off purposes of drinking water and non-corrosive liquids with maximum temperature of 80oC.
- The valve parts, spindle disposition mechanism and sealing uniquely designed by AICC.
- Easy service with no need to detach the valve from the water line system
- Suitable for underground systems as heavy duty valve
- Designed and manufactured according to DIN3352-4 and ISIRI3363
- Flanges drilled according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Body, wedge and bonnet made of ductile iron EN1563(GJS400) for PN10/16 and EN1563(GJS500) for PN25
- Wedge rubberized all over with EPEM according to DIN53538-5
- Spindle made of stainless steel 1.4021 according to DIN17440 with rolled thread and ultra-burnished sealing surface
- Inside and outside surfaces covered with a minimum of 250 micron epoxy electrostatic paint coating according to DIN30677
- Sizes DN50 to DN600 from series F4 are available
-
- This valve is completely sealed from outside elements, and protected by an exterior coating to resist corrosion.
- Stem length is available to customer specifications.
- Anti-Corrosion and normal valves series F4 and F5 (short and long) Sizes DN50 to DN300 are available
- Designed and manufactured according to DIN3352-4 and ISIRI3363
- Flanges drilled according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Body, wedge and bonnet made of ductile iron EN1563(GJS400) for PN10/16 and EN1563(GJS500) for Pn25
- The remaining features of the valve depend on each specific model
-
- The valve is used in fire safety systems, oil, gas, and petrochemical industries and power plants for on/off purposes.
- suitable for use with water and neutral liquids, to a maximum temperature +80oC.
- Designed and manufactured according to DIN3352-4 and ISIRI3363
- Flanges drilled according to ASME B16.5 and other standards upon request
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Body, wedge and bonnet made of ductile iron EN1563(GJS400) for PN10/16 and EN1563(GJS500) for PN25
- The remaining features of the valve depend on each specific model
-
The valve is used in industrial, agricultural and water line systems, potable water, pump stations for non-corrosive liquids with maximum temperature of 80oC
- Drilling and dimension of flanges according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to EN 558-1
- Body made of ductile iron EN1563(GJS400)
- The Blocking ball made of Aluminum volcanized with EPDM according to DIN53538-5
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
-
The valve is used in industrial, agricultural and water line systems, potable water, pump stations for non-corrosive liquids with maximum temperature of 80oC
- Drilling and dimension of flanges according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to EN 558-1
- Body made of ductile iron EN1563(GJS400)
- The Blocking ball made of Aluminum volcanized with EPDM according to DIN53538-5
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677