- Drilling and dimension of flanges according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to EN 558-1
- Body made of ductile iron EN1563(GJS400)
- The Blocking ball made of Aluminum volcanized with EPDM according to DIN53538-5
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
-
The valve is used in industrial, agricultural and water line systems, potable water, pump stations for non-corrosive liquids with maximum temperature of 80oC
-
The valve is used in industrial, agricultural and water line systems, potable water, pump stations for non-corrosive liquids with maximum temperature of 80oC
- Drilling and dimension of flanges according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to EN 558-1
- Body made of ductile iron EN1563(GJS400)
- The Blocking ball made of Aluminum volcanized with EPDM according to DIN53538-5
- Inside and outside surfaces of ductile iron parts covered with a minimum of 250 micron epoxy electrostatic method coating according to DIN30677
-
- The valve is used in fire safety systems, oil, gas, and petrochemical industries and power plants for on/off purposes.
- suitable for use with water and neutral liquids, to a maximum temperature +80oC.
- Designed and manufactured according to DIN3352-4 and ISIRI3363
- Flanges drilled according to ASME B16.5 and other standards upon request
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Body, wedge and bonnet made of ductile iron EN1563(GJS400) for PN10/16 and EN1563(GJS500) for PN25
- The remaining features of the valve depend on each specific model
-
- This valve is completely sealed from outside elements, and protected by an exterior coating to resist corrosion.
- Stem length is available to customer specifications.
- Anti-Corrosion and normal valves series F4 and F5 (short and long) Sizes DN50 to DN300 are available
- Designed and manufactured according to DIN3352-4 and ISIRI3363
- Flanges drilled according to EN 1092-2 and other standards upon request
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Body, wedge and bonnet made of ductile iron EN1563(GJS400) for PN10/16 and EN1563(GJS500) for Pn25
- The remaining features of the valve depend on each specific model
-
The valve is used in fire safety systems, oil, gas, and petrochemical industries and power plants for on/off purposes.
- suitable for use with water and neutral liquids, to a maximum temperature +80oC.
- Designed and manufactured according to DIN3352-4 and ISIRI3363
- Flanges drilled according to ASME B16.5 and other standards upon request
- Flanges face-to-face length according to (EN558-1) DIN3202-1
- Body, wedge and bonnet made of ductile iron EN1563(GJS400) for PN10/16 and EN1563(GJS500) for PN25
- The remaining features of the valve depend on each specific model
-
Application:
- Isolating
- Flow control (Maximum flow velocity 3 m/s)
- Easy installation and maintenance, low pressure drop.
- Suitable installation between flanges that are drilled in accordance with EN1092-2 or ASME B 16.5 without need of sealing washer for installation.
- Body and disc made of ductile iron EN1563 (GJS 400)
- Seat made of wear resistant EPDM rubber DIN53538-5
- Possibility of installation in any desired position.
-
Application:
- Isolating
- Flow control (Maximum flow velocity 3 m/s)
- Easy installation and maintenance, low pressure drop.
- Suitable installation between flanges that are drilled in accordance with EN1092-2 or ASME B 16.5 without need of sealing washer for installation.
- Body and disc made of ductile iron EN1563 (GJS 400)
- Seat made of wear resistant EPDM rubber DIN53538-5
- Possibility of installation in any desired position.
-
Application:
- Isolating
- Flow control (Maximum flow velocity 3 m/s)
- Easy installation and maintenance, low pressure drop.
- Suitable installation between flanges that are drilled in accordance with EN1092-2 or ASME B 16.5 without need of sealing washer for installation.
- Body and disc made of ductile iron EN1563 (GJS 400)
- Seat made of wear resistant EPDM rubber DIN53538-5
- Possibility of installation in any desired position.
-
Application:
- Isolating
- Flow control (Maximum flow velocity 3 m/s)
- Easy installation and maintenance, low pressure drop.
- Suitable installation between flanges that are drilled in accordance with EN1092-2 or ASME B 16.5 without need of sealing washer for installation.
- Body and disc made of ductile iron EN1563 (GJS 400)
- Seat made of wear resistant EPDM rubber DIN53538-5
- Possibility of installation in any desired position.
-
Application:
- Isolating
- Flow control (Maximum flow velocity 3 m/s)
- Easy installation and maintenance, low pressure drop.
- Suitable installation between flanges that are drilled in accordance with EN1092-2 or ASME B 16.5 without need of sealing washer for installation.
- Body and disc made of ductile iron EN1563 (GJS 400)
- Seat made of wear resistant EPDM rubber DIN53538-5
- Possibility of installation in any desired position.
-
Application:
- Isolating
- Flow control (Maximum flow velocity 3 m/s)
- Easy installation and maintenance, low pressure drop.
- Suitable installation between flanges that are drilled in accordance with EN1092-2 or ASME B 16.5 without need of sealing washer for installation.
- Body and disc made of ductile iron EN1563 (GJS 400)
- Seat made of wear resistant EPDM rubber DIN53538-5
- Possibility of installation in any desired position.
-
Application:
- Isolating
- Flow control (Maximum flow velocity 3 m/s)
- Easy installation and maintenance, low pressure drop.
- Suitable installation between flanges that are drilled in accordance with EN1092-2 or ASME B 16.5 without need of sealing washer for installation.
- Body and disc made of ductile iron EN1563 (GJS 400)
- Seat made of wear resistant EPDM rubber DIN53538-5
- Possibility of installation in any desired position.
-
Application:
- Isolating
- Flow control (Maximum flow velocity 3 m/s)
- Easy installation and maintenance, low pressure drop.
- Suitable installation between flanges that are drilled in accordance with EN1092-2 or ASME B 16.5 without need of sealing washer for installation.
- Body and disc made of ductile iron EN1563 (GJS 400)
- Seat made of wear resistant EPDM rubber DIN53538-5
- Possibility of installation in any desired position.
-
- The valve is used in industrial, agricultural and water line system, potable water, pump station with maximum temperature of 80oC.
- Easy installation and maintenance, low pressure drop.
- Full bore valve
- Self cleaning property due to continuous movement of the ball.
- Excellent resistant to erosion and corrosion.
- Drilling and dimension of flanges according to (EN558-1) DIN3202-1
- Body mad of ductile iron EN1563 (GJS400)
- Ball made of Aluminum volcanized with EPDM according to DIN53538-5 resistant against friction and hammer effect.
- Stainless steel filter AISI304 according to DIN17440 with 5mm diameter of hole.
- Inside and outside surfaced of body with a minimum of 250 micron epoxy electrostatic method coating according DIN30677
-
- The valve is used in industrial, agricultural and water line system, potable water, pump station with maximum temperature of 80oC.
- Easy installation and maintenance, low pressure drop.
- Full bore valve
- Self cleaning property due to continuous movement of the ball.
- Excellent resistant to erosion and corrosion.
- Drilling and dimension of flanges according to (EN558-1) DIN3202-1
- Body mad of ductile iron EN1563 (GJS400)
- Ball made of Aluminum volcanized with EPDM according to DIN53538-5 resistant against friction and hammer effect.
- Stainless steel filter AISI304 according to DIN17440 with 5mm diameter of hole.
- Inside and outside surfaced of body with a minimum of 250 micron epoxy electrostatic method coating according DIN30677
-
- The valve is used in industrial, agricultural and water line system, potable water, pump station with maximum temperature of 80oC.
- Easy installation and maintenance, low pressure drop.
- Full bore valve
- Self cleaning property due to continuous movement of the ball.
- Excellent resistant to erosion and corrosion.
- Drilling and dimension of flanges according to (EN558-1) DIN3202-1
- Body mad of ductile iron EN1563 (GJS400)
- Ball made of Aluminum volcanized with EPDM according to DIN53538-5 resistant against friction and hammer effect.
- Stainless steel filter AISI304 according to DIN17440 with 5mm diameter of hole.
- Inside and outside surfaced of body with a minimum of 250 micron epoxy electrostatic method coating according DIN30677
-
- The valve is used in industrial, agricultural and water line system, potable water, pump station with maximum temperature of 80oC.
- Easy installation and maintenance, low pressure drop.
- Full bore valve
- Self cleaning property due to continuous movement of the ball.
- Excellent resistant to erosion and corrosion.
- Drilling and dimension of flanges according to (EN558-1) DIN3202-1
- Body mad of ductile iron EN1563 (GJS400)
- Ball made of Aluminum volcanized with EPDM according to DIN53538-5 resistant against friction and hammer effect.
- Stainless steel filter AISI304 according to DIN17440 with 5mm diameter of hole.
- Inside and outside surfaced of body with a minimum of 250 micron epoxy electrostatic method coating according DIN30677
-
- The valve is used in industrial, agricultural and water line system, potable water, pump station with maximum temperature of 80oC.
- Easy installation and maintenance, low pressure drop.
- Full bore valve
- Self cleaning property due to continuous movement of the ball.
- Excellent resistant to erosion and corrosion.
- Drilling and dimension of flanges according to (EN558-1) DIN3202-1
- Body mad of ductile iron EN1563 (GJS400)
- Ball made of Aluminum volcanized with EPDM according to DIN53538-5 resistant against friction and hammer effect.
- Stainless steel filter AISI304 according to DIN17440 with 5mm diameter of hole.
- Inside and outside surfaced of body with a minimum of 250 micron epoxy electrostatic method coating according DIN30677
-
- The valve is used in industrial, agricultural and water line system, potable water, pump station with maximum temperature of 80oC.
- Easy installation and maintenance, low pressure drop.
- Full bore valve
- Self cleaning property due to continuous movement of the ball.
- Excellent resistant to erosion and corrosion.
- Drilling and dimension of flanges according to (EN558-1) DIN3202-1
- Body mad of ductile iron EN1563 (GJS400)
- Ball made of Aluminum volcanized with EPDM according to DIN53538-5 resistant against friction and hammer effect.
- Stainless steel filter AISI304 according to DIN17440 with 5mm diameter of hole.
- Inside and outside surfaced of body with a minimum of 250 micron epoxy electrostatic method coating according DIN30677
-
- The valve is used in industrial, agricultural and water line system, potable water, pump station with maximum temperature of 80oC.
- Easy installation and maintenance, low pressure drop.
- Full bore valve
- Self cleaning property due to continuous movement of the ball.
- Excellent resistant to erosion and corrosion.
- Drilling and dimension of flanges according to (EN558-1) DIN3202-1
- Body mad of ductile iron EN1563 (GJS400)
- Ball made of Aluminum volcanized with EPDM according to DIN53538-5 resistant against friction and hammer effect.
- Stainless steel filter AISI304 according to DIN17440 with 5mm diameter of hole.
- Inside and outside surfaced of body with a minimum of 250 micron epoxy electrostatic method coating according DIN30677